Jump to content 日本-日本語
日本HPホーム 製品とサービス サポートとドライバ ソリューション ご購入方法
≫ お問い合わせ
製品とサービス  >  ソフトウェアとOS  >  Linux

HP Insight Management Agentsについての技術情報 v3.7-26 対応環境とインストール方法
(Support Pack v 3.93)

Open Source & Linux

導入事例

product

ハードウェア
ソフトウェア
サービス & サポート

buy now?

HPE OPEN SERVICES
保守サービス
教育プログラム

support

OS対応表
ProLiant
Workstation
システム構成図
技術文書
FAQ
ディストリ対応表
サポート & ドライバ
リンク
SDR - 設定方法
FreeBSD
日本ヒューレット・パッカードサイトマップ
HPE & Red Hat情報ポータル HPEとRed Hatが実現するオープンなイノベーション
BSD 動作確認レポート等を掲載
コンテンツに進む
23-MAY-08
 本ページに記載してある内容は限られた評価環境に於ける検証結果に基づいたものです。本ページの情報を利用する前に予めサイト内リンク技術情報サイト内リンク保証について、ディストリビュータが提供する WEBサイト等をご覧ください。
 本ページでは HP Insight Management Agents(Insight Manager用 Linux版エージェント)のインストール方法を記述します

注意事項と既知の問題について

 SmartArrayのディスク障害時、物理ドライブのエラーが SIMで検知できません。この時 syslogには以下のメッセージが記録されます。

hpimaidad[2739]: Payload too large for trap=3046, trap not sent
 
 なお、mailと、SMHでは確認可能です。また、論理ドライブのエラーは正常にSIMで検知できます。

対応するディストリビューションについて

  • Red Hat Enerprise Linux AS/ES4 for Itanium Update4以降
  • Red Hat Enterprise Linux 5 for Itanium

対応するハードウェアについて

  • HP Integrity サーバシリーズ

インストール手順について

 HPIMA HP提供の HP Integrity Essentials Foundation Pack for Linux 2.1/ Support Pack に含まれます。
 下記の例では、管理者用ワークステーションの IPアドレスが 192.168.0.11、エージェントを導入する Linuxサーバ(RedHat EL4U5)の IPアドレスが 192.168.0.1の場合の例です。各種 SNMP関連、ファイアウォール関連の設定はご利用の環境に合わせて適当なものに変更してください。

Support Packパッケージの展開
# tar xvf SupportPack-3.93-rhel4.ia64.tar

インストールシェルの実行
# cd SupportPack-3.93
# ./install.sh
Welcome to the HP Integrity Essentials Foundations Pack for Linux version 3.93.

Check http://downloads.hpe.com/pub/linux for software updates [Y/n]?
n      ←”n”を入力し、HPサイトからのアップデートを無効に
You have selected not to update your Management CD software at this time. If you would like to update this software in the future, you can obtain the latest version from HP's support website as follows:
For the latest information and downloads go to http://www.hp.com/go/integritylinuxessentials

Press <enter> to continue the installation of the current version of the Management CD.
      ←Enterキー入力
installing hpmgmtbase-2.5-21.rhel4.ia64.rpm
Using the IPMI modules and setup of package OpenIPMI
Please wait while data is cached...
Starting ipmi drivers: [ OK ]
Start HP IPMI SEL daemon 'hpseld': [ OK ]
The hpmgmtbase RPM has installed successfully.

1. Install HP Insight Manager Agents for IA-64 Linux
2. Install HP System Management Homepage for Linux on the Itanium Processor
3. Install nPartition Commands
4. Install The nPartition Management GUI for HP Integrity servers.
5. Install HP WBEM Providers for Linux
6. Install HP Command Line Array Configuration Utility
7. Install HP Utilization WBEM Provider
8. Install MPT Fusion SAS Integrated RAID configuration utility
9. Install HPVM WBEM Provider for Linux
10. Install The Open64 Compiler Suite v4.0
11. Install everything and exit
12. Exit
What do you want to install?
1       ←”1”を入力し、HPIMAをインストール
Removing net-snmp-perl
Removing net-snmp-devel
Removing net-snmp-utils
Removing net-snmp
Removing net-snmp-libs
Stopping tog-pegasus
installing hpmgmtbase-2.6-11.rhel4.ia64.rpm
Using the IPMI modules and setup of package OpenIPMI
Please wait while data is cached...
Starting ipmi drivers: [ OK ]
Start HP IPMI SEL daemon 'hpseld': [ OK ]
The hpmgmtbase RPM has installed successfully.
Starting tog-pegasus
2.5.1
installing net-snmp-libs-5.1.2-11.EL4.6hp.ia64.rpm
installing net-snmp-5.1.2-11.EL4.6hp.ia64.rpm
installing net-snmp-utils-5.1.2-11.EL4.6hp.ia64.rpm
installing net-snmp-perl-5.1.2-11.EL4.6hp.ia64.rpm
installing hpima-3.7-26.rhel4.ia64.rpm

__________________________________________________________________________

The following file(s) contained the prior SNMP configuration:
/etc/snmp/snmpd.conf
They have been saved and will be restored when hpima is removed.

New configuration is saved in /etc/snmp/snmpd.conf.
Run '/etc/init.d/hpima reconfigure' to make changes.

__________________________________________________________________________

(Re)starting the SNMP daemon, configured to support the
HP Insight Management Agents
Starting snmpd: [ OK ]
Start SNMP AgentX Intermediary 'hpimaX': [ OK ]
Start Foundation Peer Daemon 'hpimafdtnpeerd': [ OK ]
Start Foundation Host Agent 'hpimahostd': [ OK ]
Start Foundation Threshold Agent 'hpimathreshd': [ OK ]
Start Server Peer Daemon 'hpimasvrpeerd': [ OK ]
Start Server Health Agent 'hpimahealthd': [ OK ]
Start Server Standard Equipment Agent 'hpimastdeqd': [ OK ]
Start Storage Event Agent 'hpimaeventd': [ OK ]
Start Storage Intelligent Disk Array Agent 'hpimaidad': [ OK ]
Start Storage Serial Attached SCSI Agent 'hpimasasd': [ OK ]
Start Storage SCSI Agent 'hpimascsid': [ OK ]
Start Storage Fibre Channel Agent 'hpimafcad': [ OK ]
Start NIC Agent 'hpimanicd': [ OK ]
Start Event E0 Trap Generator 'hpimaE0traps': [ OK ]
HP Insight Management Agents are enabled
The hpima RPM has installed successfully.

1. Install HP Insight Manager Agents for IA-64 Linux
2. Install HP System Management Homepage for Linux on the Itanium Processor
3. Install nPartition Commands
4. Install The nPartition Management GUI for HP Integrity servers.
5. Install HP WBEM Providers for Linux
6. Install HP Command Line Array Configuration Utility
7. Install HP Utilization WBEM Provider
8. Install MPT Fusion SAS Integrated RAID configuration utility
9. Install HPVM WBEM Provider for Linux
10. Install The Open64 Compiler Suite v4.0
11. Install everything and exit
12. Exit What do you want to install?
12       ←”12"を入力し、インストールシェルを終了
JAVA_HOME (-) does not point to a java installation.
exiting . . .

HPIMAの設定
# service hpima reconfigure
__________________________________________________________________________

The following file(s) contain the current SNMP configuration:
/etc/snmp/snmpd.conf

Please respond to the following prompts to configure
SNMP for use with HP Insight Management Agents...

snmp設定...
__________________________________________________________________________

Configuring SNMP general information...

Enter sysadmin contact infomation
(Name, phone, address, etc; blank to skip):

Enter system location infomation
(Building, floor, room, etc; blank to skip):

local community設定...
__________________________________________________________________________

Configuring SNMP access from 'localhost'

Enter 'Read Only' community string (one word, Blank to skip):):←community名を入力
Re-enter the same input to confirm:          ←community名を再入力

'Read/Write' community string is already known.
Do you wish to change it (y/n) (Blank is n): y     ←"y"を入力

Enter 'Read/Write' community string (one word, required, no default):←community名を入力
Re-enter the same input to confirm:          ←community名を再入力

remote community設定...

__________________________________________________________________________

Configuring SNMP access from remote Management Station(s)

Enter 'Read Only' IP or DNS name (blank to skip): 192.168.0.11 ←IP/Host名を入力

Enter 'Read Only' community string to be used by "192.168.0.11"
(one word, required, no default):           ←community名を入力
Re-enter the same input to confirm:           ←community名を再入力

Enter 'Read Only' IP or DNS name (blank to skip):

Enter 'Read/Write' IP or DNS name (blank to skip): 192.168.0.11 ←IP/Host名を入力

Enter 'Read/Write' community string to be used by "192.168.0.11"
(one word, required, no default)::            ←community名を入力
Re-enter the same input to confirm:          ←community名を再入力

Enter 'Read/Write' IP or DNS name (blank to skip):

snmp trap設定...
__________________________________________________________________________
Configuring SNMP TRAPs sent from this system......

Enter default trap community string (blank to skip): public ←community名を入力

Trapsink(s) and strings are already set to
127.0.0.1 "fXRe73SltMa7yy0w"
Do you wish to change this ? (y/n) (Blank is n): y   ←"y"を入力

Enter SNMP trap destination IP or DNS name (blank to quit): 192.168.0.11←IP/Host名を入力

Enter trap community string for trap destination "192.168.0.11"
(One word; Blank is ok): public             ←community名を入力

Enter SNMP trap destination IP or DNS name (blank to quit):

__________________________________________________________________________

The following file(s) contained the prior SNMP configuration:
/etc/snmp/snmpd.conf
They have been saved and will be restored when hpima is removed.

New configuration is saved in /etc/snmp/snmpd.conf.
Run '/etc/init.d/hpima reconfigure' to make changes.

__________________________________________________________________________

(Re)starting the SNMP daemon, configured to support the
HP Insight Management Agents
Stopping snmpd:                       [ OK ]
Starting snmpd:                       [ OK ]
# service hpima start
Start SNMP AgentX Intermediary 'hpimaX':          [ OK ]
Start Foundation Peer Daemon 'hpimafdtnpeerd':       [ OK ]
Start Foundation Host Agent 'hpimahostd':          [ OK ]
Start Foundation Threshold Agent 'hpimathreshd':      [ OK ]
Start Server Peer Daemon 'hpimasvrpeerd':          [ OK ]
Start Server Health Agent 'hpimahealthd':          [ OK ]
Start Server Standard Equipment Agent 'hpimastdeqd':    [ OK ]
Start Storage Peer Daemon 'hpimastorpeerd':         [ OK ]
Start Storage Event Agent 'hpimaeventd':          [ OK ]
Start Storage Intelligent Disk Array Agent 'hpimaidad':   [ OK ]
Start Storage Serial Attached SCSI Agent 'hpimasasd':    [ OK ]
Start Storage SCSI Agent 'hpimascsid':           [ OK ]
Start Storage Fibre Channel Agent 'hpimafcad':       [ OK ]
Start NIC Peer Daemon 'hpimanicpeerd':           [ OK ]
Start NIC Agent 'hpimanicd':                [ OK ]
Start Event E0 Trap Generator 'hpimaE0traps':        [ OK ]
HP Insight Management Agents are enabled


 以降、Insight Managerの管理者コンソールから該当システムが正常に認識できるか確認してください。認識できない場合、IPアドレス、snmpd.confの設定、firewallの設定等を確認してください。

UIDユーティリティの起動方法について

 利用例はサイト内リンクこちらをごください。 詳細はTEXT#man hpuidをご覧ください

ダウンロード

 本ソフトウェアは下記 HP Integrity Essentials Foundation Pack for Linux 2.1 / Support Pack v3.93に同梱されています。

ftp-JPN
ダウンロード EXESupportPack-3.93-rhel4.ia64.tar
EXESupportPack-3.93-rhel5.ia64.tar

印刷用画面へ印刷用画面へ
プライバシー ご利用条件・免責事項 ウェブマスターに連絡